• タイタンテクノロジーズ株式会社
  • タイタンテクノロジーズ株式会社
  • タイタンテクノロジーズ株式会社
  • タイタンテクノロジーズ株式会社
  • タイタンテクノロジーズ株式会社
  • タイタンテクノロジーズ株式会社
  • タイタンテクノロジーズ株式会社
  • タイタンテクノロジーズ株式会社
  • タイタンテクノロジーズ株式会社
  • タイタンテクノロジーズ株式会社
  • タイタンテクノロジーズ株式会社
  • タイタンテクノロジーズ株式会社
  • タイタンテクノロジーズ株式会社
  • タイタンテクノロジーズ株式会社
  • タイタンテクノロジーズ株式会社
  • タイタンテクノロジーズ株式会社
  • タイタンテクノロジーズ株式会社
  • タイタンテクノロジーズ株式会社
  • タイタンテクノロジーズ株式会社
  • タイタンテクノロジーズ株式会社
  • タイタンテクノロジーズ株式会社
  • タイタンテクノロジーズ株式会社

Sensor Devices

English (United Kingdom)
You are here:   HomeSensorsMass Flow Controller & Meter200 Series

Mass Flow Controller 200 Series

Print PDF

 

200 SERIES

Thermal Mass Flow Controller


 

 

 

HFM-200 / HFC-202

Print PDF

 

The HFM-200 / HFC-202 is Teledyne Hastings' flexible, general purpose series of mass flow meters and controllers.  Featuring reliability and stability, the 200 Series is chosen by OEM's for its very stable performance with varying ambient conditions.  A wide choice of elastomer seals make this flow controller compatible with most gases.

The HFM-200 / HFC-202 meters and controllers have flow ranges from 0-10 sccm to flows of 0-25 slm; provide analog outputs, are constructed of stainless steel and have normally closed valves. The full scale range is specified by the end user. A NIST traceable calibration certificate is standard. Many corrosive gases and pressures up to 1000 psig are easily measured. Cleaning for oxygen service is available.

 


±(1% of full scale) Accuracy

 

Applications and Industries

 

Air Sampling

Industrial Furnaces

Gas Blending

R&D Process Flows

Analytical Instrumentation

Catalyst Characterization

 

HFM-200A Meter

HFC-202 Controller

​Range 
(User Selectable)

0 - 10 sccm to 0 - 25 slm (N2)

​0 - 10 sccm to 0 - 25 slm (N2)

Accuracy

+ 1.0% of full scale

+ 1.0% of full scale

​Repeatability

+ 0.05% of full scale

+ 0.05% of full scale

Maximum Working Pressure

500 PSIG (Optional 1000 PSIG)

​​500 PSIG (Optional 1000 PSIG)

Analog I/O (Standard)

​​0 - 5 VDC

​​0 - 5 VDC

Analog I/O (Optional)

4​ - 20 mA I.O, 0 - 20 mA, 
0 - 5 VDC / 4 - 20 mA I/O

4​ - 20 mA I.O, 0 - 20 mA, 
0 - 5 VDC / 4 - 20 mA I/O

Fitting Options

VCR®, VCO®, Swagelok®, Straight Thread

VCR®, VCO®, Swagelok®, Straight Thread

Elastomer Seal Options

Viton®, Kalrez, Buna-N, Neoprene

Viton®, Kalrez, Buna-N, Neoprene

​Connector (+/- 15 VDC)
Connector (+24 VDC)

​15-pin subminiature D
9-pin subminiature D

​15-pin subminiature D
9-pin subminiature D

Power Requirements (+/- 15 V)
Power Requirements (+24 V)

​​+(14 - 16) VDC @ + 30 mA (<1 Watt)
(14-32) VDC (<1.9 Watt)

​​+(14 - 16) VDC @ +​ 60 mA / -185 mA (<3 Watt)
(14-32) VDC (<4.2 Watt)

Wetted Materials

​316L SS, Viton®, 82/18 Au/Ni Braze, Trace Ag Solder

​​302 SS, 316L SS, Nickel, Viton®, 82/18 Au/Ni Braze, Trace Ag Solder, Kalrez® (Valve Seat)

 

 

 

HFM-201 / HFC-203

Print PDF

 

The HFM-201 / HFC-203, Teledyne Hastings' flexible, general purpose series of mass flow meters and controllers accurately measure and control mass flow in a variety of applications.  Featuring reliability and stability, the 200 Series is chosen for its very stable performance with varying ambient conditions.  A wide choice of elastomer seals make this flow controller compatible with most gases.

The HFM-201 / HFC-203 meters and controllers have flow ranges from 0-25 slm to flows of 0-1000 slm; provide analog outputs, are constructed of stainless steel and can be configured with normally open or normally closed valves. The full scale range is specified by the end user.  A NIST traceable calibration certificate is standard. Many corrosive gases and pressures up to 1000 psig are easily measured. Cleaning for oxygen service is available.

 


±(1% of full scale) Accuracy

 

Applications and Industries

 

Flame Spray

Leak Test

Aerospace

Porosity Studies

Air Sampling

 

HFM-201 Meter

HFC-203 Controller

​Range 
(User Selectable)

(L): 0 - 25 slm to 0 - 500 slm (N2)
(H): 0 - 500 slm to 0 - 1000 slm (N
2)

(L): 0 - 25 slm to 0 - 500 slm (N2)
(H): 0 - 500 slm to 0 - 1000 slm (N
2)

Accuracy

+ 1% of full scale

+ 1% of full scale

​Repeatability

+ 0.05% of full scale

+ 0.05% of full scale

Maximum Working Pressure

500 PSIG (Optional 1000 PSIG)

500 PSIG ​(Optional 1000 PSIG)

Analog I/O (Standard)

​​0 - 5 VDC

​​0 - 5 VDC

Analog I/O (Optional)

4 - 20 mA I/O, 0 - 20 mA, 0 -5 VDC / 
4 - 20 mA I/O

4 - 20 mA I/O, 0 - 20 mA, 0 -5 VDC / 
4 - 20 mA I/O

Fittings Option

VCR®, VCO®, Swagelok®, Straight Thread, NPT

VCR®, VCO®, Swagelok®, Straight Thread, NPT

​Connector (+/- 15 VDC)
​Connector (+ 24 VDC)

​15-pin subminiature D
9-pin subminiature D

​​​15-pin subminiature D
9-pin subminiature D

Power Requirements (+​ 15V)
Power Requirements (+​ 24V)

+ (14 - 16) VDC @ +30 mA (<1 Watt)
(14 - 32) VDC (<1.9 Watt)

+ (14 - 16) VDC @ +​60 mA / -185 mA (<3 Watt)
(14 - 32) VDC (<4.2 Watt)

Wetted Materials

​316L SS, Viton®, 82/18 Au/Ni Braze, Trace Ag Solder

302 SS, 316 SS, Nickel, Viton®, 82/18 Au/Ni Braze, Trace Ag Solder, Kalrez® (Valve Seat)

 

HFM-205 / HFC-207

Print PDF

 

Excellent stability! The HFM-205/HFC-207, Teledyne Hastings' flexible, general purpose series of mass flow meters and controllers accurately measure and control mass flow in a variety of applications.  Featuring reliability and stability, the 200 Series is chosen for its very stable performance with varying ambient conditions. A wide choice of elastomer seals make this flow controller compatible with most gases.

The HFM-205 / HFC-207 meters and controllers have flow ranges from 0-1000 slm to flows of 0-2500 slm; provide analog outputs, are constructed of stainless steel and can be configured with normally open or normally closed valves. The full scale range is specified by the end user. A NIST traceable calibration certificate is standard. With a full complement of fitting and elastomer options, the HFM-205/ HFC-207 covers a wide range of high flow applications.

 


±(1% of full scale) Accuracy

 

Applications and Industries

 

Flame Spray

Leak Test

Aerospace

 

HFM-205 Meter

HFC-207 Controller

​Range 
(User Selectable)

0 - 1000 slm to 0 - 2500 slm (N2)

0 - 1000 slm to 0 - 2500 slm (N2)

Accuracy

+ 1.0% of full scale

+ 1.0% of full scale

​Repeatability

+ 0.05% of full scale

+ 0.05% of full scale

Maximum Working Pressure

500 PSIG

​​500 PSIG

Analog I/O (Standard)

​​0 - 5 VDC

​​0 - 5 VDC

Analog I/O (Optional)

4​ - 20 mA I.O, 0 - 20 mA, 
0 - 5 VDC / 4 - 20 mA I/O

4​ - 20 mA I.O, 0 - 20 mA, 
0 - 5 VDC / 4 - 20 mA I/O

Fitting Options

VCR®, VCO®, Swagelok®, Straight Thread

VCR®, VCO®, Swagelok®, Straight Thread

Elastomer Seal Options

Viton®, Kalrez, Buna-N, Neoprene

Viton®, Kalrez, Buna-N, Neoprene

​Connector (+/- 15 VDC)
Connector (+24 VDC)

​15-pin subminiature D
9-pin subminiature D

​15-pin subminiature D
9-pin subminiature D

Power Requirements (+/- 15 V)
Power Requirements (+24 V)

​​+(14 - 16) VDC @ + 30 mA (<1 Watt)
(14-32) VDC (<1.9 Watt)

​​+(14 - 16) VDC @ +​ 60 mA / -185 mA (<3 Watt)
(14-32) VDC (<3 Watt)

Wetted Materials

​302 SS, 316 SS, Nickel 200, Viton®

​​302 SS, 316 SS, Nickel 200, Viton®, Kalrez® (Valve Seat)

 

Titan Technologies, K.K.

8-5-7-301 Minami-Senju, Arakawa-Ku, Tokyo 116-0003 Japan